3. Brush sensitive equipment carefully and, if possible, handle them separately small autoclave sterilizer from general equipment.
4. Examine all device places to be visibly fresh and free of places and cells. Examine each device for proper operate and condition. Scissor rotor blades should glide smoothly and the rotor blades must not be reduce when in closed position. Check that forceps tips are effectively aligned. Hemostats and hook owners should not show light between the oral cavity, they should secure and open up easily, and the joints should not be too reduce. Check hook holder oral cavity for wear. Examine cutting equipment and knives to be sure their sterilizer autoclave rotor blades are distinct and undamaged.
5. Rinse equipment thoroughly under flowing standard water. While washing, make scissers, hemostats, hook owners and other hinged equipment to make sure that depend places are also washed.
6. Dry equipment thoroughly with a clear soft towel. This reduces the chance of deterioration and development of standard water places. Use apply lubrication (WPI aspect variety 500126) in the relies to increase use of device.
Large, non-delicate equipment can be soaked in a deterioration inhibiting 18l autoclave steam sterilizer soap (Alconox - WPI aspect variety 13740) when other washing methods are not practical. Rinsing and dehydrating after immersing is suggested.